TW / Global Website
Contact UsNeed
help
?










Mart > IP Mart

    
I2C Slave Serial Interface Controller By Quotes None 300 MHz None  
Slave serial controller compatible with the popular Philips® I2C standard. Permits an I2C Master to communicate with your ASIC device via a set of user-defined config and status registers. Supports standard (100 kbits/s), fast (400 kbits/s) and custom rates in excess of 4 Mbits/s.    Applications I2C slave communication via your ASIC Inter-chip board-level communications Introduction
I2C Master Serial Interface Controller By Quotes None 300 MHz None  
Master serial controller compatible with the popular Philips® I2C standard. Features a simple command interface and permits multiple I2C slaves to be controlled directly from  ASIC device. Supports standard (100 kbits/s), fast (400 kbits/s) and custom data rates well above 4 Mbits/s. Setup and hold-times on the SDA pin are fully configurable.    Applications Inter-chip board-level communications Standard 2-wire comms between a wide range of peripherals, MCUs and COTs ICs   Introduction
Asynchronous I2C Slave 999 Points 578.000 Gates 100 MHz 130 nm  
Unlike Synchronous type I2C slave design need clock to work. This Asynchronous type don’t need base clock . It is very power saving in some application     Application :    - Power manager IC   - Sensor IC   - Software wakeup requirement system Introduction
μIP Price Logic Gate Count Clock Rate Technology   Ratings